Below is the full list of supported parameters for the S2VNA command line.
S2VNA [optional parameters] |
For example:
S2VNA /visible:off |
Parameter |
Description |
|---|---|
/? |
Displays the help message |
/SocketServer:<on|off> |
Enables or disables TCP/IP socket server |
/SocketPort:<num> |
Assigns socket server port [default is 5025] |
/HislipServer:<on|off> |
Enables or disables HiSLIP server |
/HislipPort:<num> |
Assigns HiSLIP server port [default is 4880] |
/SerialNumber:<num> |
Connects to the Analyzer with the specified serial number |
/simulate:<on|off> |
Turns on/off simulation [default is off] |
/visible:<on|off> |
Show or hides GUI [default is on] |
/regserver |
Registers COM server |
/unregserver |
Unregisters COM server |
Rev.: 24.2