SCPI Command
CALCulate<Ch>:PARameter<Tr>:SELect
Description
Selects the active trace in the channel. Note: If the trace number is greater than the number of the traces displayed in the channel, an error occurs, and the command is ignored. |
|---|
no query |
Target
Trace <Tr> of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Tr>={[1]|2|3|4}
<Tr>={[1]…|16} (in N-port mode only)
Related Commands
Equivalent Softkeys
Trace > Active Trace
Equivalent COM Command
SCPI.CALCulate(Ch).PARameter(Tr).SELect
Syntax
app.SCPI.CALCulate(Ch).PARameter(Tr).SELect
Type
Method
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1