SCPI Command
SENSe:CORRection:PORT<Pt>:IMPedance[:INPut][:MAGNitude] <numeric>
SENSe:CORRection:PORT<Pt>:IMPedance[:INPut][:MAGNitude]?
Description
Sets or reads out the impedance Z0 of port <Pt> |
|---|
command/query |
Target
Port <Pt>,
<Pt>={[1]|2|}
Parameter
<numeric> the Z0 value from 0.001 to 1000
Unit
Ω (Ohm)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
50 Ω
Back to SENSe
Back to Command Finder
Rev.: 26.00