SCPI Command
SENSe:CORRection:COLLect:CKIT:STAN<Std>:LOSS <numeric>
SENSe:CORRection:COLLect:CKIT:STAN<Std>:LOSS?
Description
Sets or reads out the offset loss value for the calibration standard. |
|---|
command/query |
Target
Standard <Std> of the calibration kit,
<Std>={[1]|2|...N}, where N — the number of the standards in the calibration kit
Parameter
<numeric> the offset loss value from –1E18 to 1E18
Unit
Ω/s (Ohm/second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
Back to SENSe
Back to Command Finder
Rev.: 26.00