SCPI Command
SENSe<Ch>:CORRection:COEFficient:SAVE
Description
Enables the written calibration coefficients depending on the selected calibration type. On completion of the command, the error correction automatically turns ON. Executing this command before all necessary calibration coefficients have been written will result in an error and the command will be ignored. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Related Commands
Calibration type selection:
Calibration coefficient writing:
Back to SENSe
Back to Command Finder
Rev.: 26.00