SCPI Command
SENSe<Ch>:AVERage:COUNt <numeric>
SENSe<Ch>:AVERage:COUNt?
Description
Sets or reads out the averaging factor when the averaging function is turned on. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the averaging factor from 1 to 999
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10
Related Commands
Back to SENSe
Back to Command Finder
Rev.: 26.00