Traces can be displayed in one diagram, overlapping each other, or in separate diagrams within a channel window (See figures below).
Displaying two traces on the same diagram |
Displaying two traces on two different diagrams |
Add or remove a trace by pressing the Add Trace 
or Remove Trace 
buttons in the quick access toolbar.
|
|
All traces are assigned individual names, which cannot be changed. The trace name contains its number. The trace names are as follows: Tr1, Tr2, ... Tr16.
Each trace is assigned the following initial settings: measured parameter, format, scale, and color, which can be modified:
• For a detailed description of changing measured parameter see S Parameter.
•By default, the display format for all traces is set to logarithmic magnitude (dB). For a detailed description of changing display format see Format Setting.
•By default, the scale parameters are set as follows: division is set to 10 dB, reference level value is set to 0 dB, and the reference level position is in the middle of the diagram. For a detailed description of changing scale parameters see Scale Settings.
•The trace color is determined by its number. This color can be changed.
