Please enable JavaScript to view this site.

Automatic Fixture Removal

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Programming > Command Reference

AFR:SENSe

Scroll Contact Us Home Prev Top Next More

Command	Description
AFR:SENS:BAND	Sets or reads out the IF bandwidth value of the analyzer.
AFR:SENS:CALIB:TYPE?	Reads out the calibration type of the analyzer.
AFR:SENS:FREQ:STAR	Sets or reads out the start frequency value of the analyzer.
AFR:SENS:FREQ:STEP?	Reads out the step frequency value of the analyzer.
AFR:SENS:FREQ:STOP	Sets or reads out the stop frequency value of the analyzer.
AFR:SENS:POW	Sets or reads out the output power value of the analyzer.
AFR:SENS:PRES	Resets the analyzer to default settings.
AFR:SENS:SWE:POIN	Sets or reads out the number of sweep (measurement) points of the analyzer.
AFR:SENS:SWE:TYPE?	Sets or reads out the sweep type of the analyzer.

The calculation of the fixture parameters is performed only with the uniform distribution of points within the frequency range (linear frequency sweep).

© 2022 Copper Mountain Technologies

Rev.: 22.2.1