SCPI Command
SOURce:REFerence:FREQuency <frequency>
SOURce:REFerence:FREQuency?
Description
Sets or reads out the reference frequency value measured by the external frequency counter. The value is entered to calculate the analyzer frequency reference deviation compensation when the reference frequency offset feature is ON. Note: TR1300/1 model only |
|---|
command/query |
Target
Analyzer
Parameter
<frequency> the reference frequency value measured by the external frequency counter.
Unit
Hz (Hertz)
Out of Range
The reference frequency deviation is allowed from -1000 to 1000 Hz. Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10 MHz
Equivalent Softkeys
System > Misс Setup > Reference Offset > Measured Ref.
Equivalent COM Command
SCPI.SOURce.REFerence.FREQuency
Syntax
Value = app.SCPI.SOURce.REFerence.FREQuency
app.SCPI.SOURce.REFerence.FREQuency = 1E7
Type
Double (read/write)
Back to SOURce
Back to Command Finder
Back to Command Finder (From User Interface)
