The Module differ in operating frequency range and in the number of ports. Their functional features are briefly described in the table below.
During calibration, the Modules are controlled by the VNA software installed on the connected PC. The USB 2.0 interface is used for control.
The Modules feature several hardware configurations depending on the connector types of PORT A, PORT B and, if available, PORT C and PORT D. To view the possible connector type front and side views for each Module, click on the name of the desired Module in the table below.
The Module delivery package is specified in Delivery Kit.
Functional Features
Module
|
Frequency range
|
Supported calibrations
|
Features
|
50 Ohm two-port Modules
|
ACM2506
|
20 kHz to 6.5 GHz
|
Full one-port
One-path two-port
|
Unknown thru
Thermal compensation
User characterization
Automatic orientation
Confidence check
|
ACM2509
|
20 kHz to 9 GHz
|
ACM2520
|
100 kHz to 20 GHz
|
ACM2543
|
10 MHz to 44 GHz
|
ACM6000T
|
20 kHz to 6 GHz
|
ACM8000T
|
100 kHz to 8 GHz
|
75 Ohm two-port Modules
|
ACM2708
|
20 kHz to 8 GHz
|
Full one-port
One-path two-port
|
Unknown thru
Thermal compensation
User characterization
Automatic orientation
Confidence check
|
ACM4000T
|
20 kHz to 4 GHz
|
50 Ohm four-port Modules
|
ACM4509
|
100 kHz to 9 GHz
|
Full one-port
One-path two-port
|
Unknown thru
Thermal compensation
User characterization
Automatic orientation
Confidence check
|
ACM4520
|
100 kHz to 20 GHz
|
ACM8400T
|
100 kHz to 8 GHz
|
1 The upper frequency point of ACM2520 and ACM4520 with type N connectors is 18 GHz.
2 The upper frequency point of ACM2543 with 2.92 mm connectors is 40 GHz.
|
