SCPI Command
CALCulate<Ch>[:SELected]:CORRection:OFFSet:PHASe <phase>
CALCulate<Ch>[:SELected]:CORRection:OFFSet:PHASe?
Description
Sets or reads out the value of the phase offset. |
|---|
command/query |
Target
CALCulate<Ch>[:SELected] — active trace of channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<phase> the phase offset value from –360 to 360
Unit
° (degree)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Scale > Phase Offset
Equivalent COM Command
SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe
Syntax
Value = app.SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe
app.SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe = 360
Type
Double (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1