SCPI Command
TRIGger[:SEQuence]:AVERage {OFF|ON|0|1}
TRIGger[:SEQuence]:AVERage?
Description
Turns the averaging trigger function ON/OFF. The function executes a sweep the number of times specified by the averaging factor with a single trigger for the channels with the averaging enabled. The averaging process begins again with each trigger. Note: The point trigger function has priority against this command. When the point trigger is enabled the number of pulses equal to (number of points) x (averaging factor) is needed to complete the averaging. |
|---|
command/query |
Parameter
Specifies the averaging trigger function state:
{ON|1} |
ON |
{OFF|0} |
OFF |
Query Response
{0|1}
Preset Value
0
Related Commands
Equivalent Softkeys
Average > Avg Trigger {ON/OFF}
Equivalent COM Command
SCPI.TRIGger.SEQuence.AVERage
Syntax
Status = app.SCPI.TRIGger.SEQuence.AVERage
app.SCPI.TRIGger.SEQuence.AVERage = True
Type
Boolean (read/write)
Back to TRIGger
Back to Command Finder
Back to Command Finder (From User Interface)
