The sweep type determines how the stimulus range is scanned:
•By frequency (linear frequency sweeps, logarithmic frequency sweeps or segment sweep mode).
•By power (linear power sweep).
The channel to which the function is applied must be preselected as active (See Selection of Active Trace/Channel ).
|
To set the sweep type, use the following softkeys: Stimulus > Sweep Type Then select the sweep type: •Lin Freq — Linear frequency sweep. •Log Freq — Logarithmic frequency sweep. •Segment — Segment frequency sweep. •Power Sweep — Power sweep. |
|
|
note |
The Sweep Type can be selected using the mouse (See Sweep Type Setting). |
Rev.: 22.4