SCPI Command
SOURce<Ch>:POWer:STARt <power>
SOURce<Ch>:POWer:STARt?
Description
Sets or reads out the power sweep start value when the power sweep type is active. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<power> the power sweep start value within the power limits of the analyzer
Unit
dBm (decibels above 1 milliwatt)
Resolution
0.05 dBm
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
Depends on the analyzer
Equivalent Softkeys
Stimulus > Start
Equivalent COM Command
SCPI.SOURce(Ch).POWer.STARt
Syntax
Value = app.SCPI.SOURce(Ch).POWer.STARt
app.SCPI.SOURce(Ch).POWer.STARt = 5
Type
Double (read/write)
Back to SOURce
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4