SCPI Command
SOURce<Ch>:POWer:PORT<Pt>[:LEVel][:IMMediate][:AMPLitude] <power>
SOURce<Ch>:POWer:PORT<Pt>[:LEVel][:IMMediate][:AMPLitude]?
Description
Sets or reads out the power level of each port for the frequency sweep type when the port couple feature is set to OFF by the SOUR:POW:PORT:COUP command. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2|3|4}
Parameter
<power> the power level within the power limits of the analyzer.
Unit
dBm (decibels above 1 milliwatt)
Resolution
0.05 dBm
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Related Commands
Equivalent Softkeys
Stimulus > Power > Port Power > Port n
Equivalent COM Command
SCPI.SOURce(Ch).POWer.PORT(Pt).LEVel.IMMediate.AMPLitude
Syntax
Value = app.SCPI.SOURce(Ch).POWer.PORT(Pt).LEVel.IMMediate.AMPLitude
app.SCPI.SOURce(Ch).POWer.PORT(Pt).LEVel.IMMediate.AMPLitude = 10
Type
Double (read/write)
Back to SOURce
Back to Command Finder
Back to Command Finder (From User Interface)
