SCPI Command
SYSTem:FIFO:DEBug:WINDow[:STATe] {OFF|ON|0|1}
SYSTem:FIFO:DEBug:WINDow[:STATe]?
Description
Turns the information window of the FIFO buffer ON/OFF. The typical purpose of the window is to debug FIFO buffer instructions. The FIFO buffer window contains the following parameters: •buffer capacity, presented in the number of sweeps and in MB •number of wrote sweeps •number of sweeps read •number of trigger misses •buffer occupancy percentage •overflow flag •data format (depends on enabled traces) Note: Cobalt Series, S5180B, and S5243 models only. |
|---|
command/query |
Target
Analyzer
Parameter
{ON|1} |
window is displayed |
{OFF|0} |
window OFF |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
None
Equivalent COM Command
None
Back to SYSTem
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1