SCPI Command
SENSe:PULS2:OUTPut {OFF|ON}
SENSe:PULS2:OUTPut?
Sets or reads out the designation of the "Pulse 2 In/Out" connector. Enables the internal generator "Pulse2" signal to be routed to the "Pulse 2 In/Out" connector. If this connector is used for "Pulse Trigger" signal then the SENS:SWE:PULS:TRIG:SOUR command has priority. Note: S5180B model only. |
---|
command/query |
Analyzer
<char> Choose from:
OFF |
"Pulse 2 In/Out" connector does not output the “Pulse 2” signal. |
ON |
"Pulse 2 In/Out" connector outputs the “Pulse 2” signal. |
{OFF|ON}
OFF
Stimulus > Pulse Meas >Pulse 2 Out > {OFF | ON}
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)