SCPI Command
SENSe<Ch>:FREQuency:STARt <frequency>
SENSe<Ch>:FREQuency:STARt?
Sets or reads out the stimulus start value of the sweep range for linear or logarithmic sweep type. |
---|
command/query |
Channel <Ch>,
<Ch>={[1]|2|...16}
<frequency> the stimulus start value within the frequency limits of the analyzer.
Hz (Hertz)
Sets the value of the limit, which is closer to the specified value.
<numeric>
The minimum frequency span of the analyzer
Stimulus > Start
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.STARt
Value = app.SCPI.SENSe(Ch).FREQuency.STARt
app.SCPI.SENSe(Ch).FREQuency.STARt = 1E6
Double (read/write)
Back to SENSe
Back to Command Finder