Name |
Description |
---|---|
200 |
Execution error |
201 |
Invalid channel index |
202 |
Invalid trace index |
203 |
Invalid marker index |
204 |
Marker is not enabled |
205 |
Invalid save type specifier |
206 |
Invalid sweep type specifier |
207 |
Invalid trigger source specifier |
208 |
Invalid measurement parameter specifer |
209 |
Invalid format specifier |
210 |
Invalid data math specifier |
211 |
Trigger ignored |
212 |
Invalid trigger source |
213 |
Init ignored |
214 |
Invalid limit data |
215 |
Invalid segment dat |
216 |
Invalid standard type specifier |
217 |
Invalid conversion specifier |
218 |
Invalid gating shape specifier |
219 |
Invalid gating type specifier |
220 |
Parameter Error |
221 |
Invalid port index |
222 |
Data out of range |
223 |
No Calibration Measurement Data |
224 |
Illegal parameter value |
225 |
Calibration Kit Definition Error |
226 |
Differ Forward and Reverse Thru |
227 |
Differ Forward and Reverse TRL Thru |
228 |
Differ Forward and Reverse Line |
229 |
TRL Math Standard is not Load Type Standard |
230 |
ACM Auto-Orientation Error |
231 |
ACM Orientation Settings Error |
232 |
AutoCal Execution Error |
233 |
ACM Frequency Settings Error |
234 |
ACM Characterization Error |
235 |
Frequency Range Exceeds ACM Characterization Frequency Range |
236 |
AutoCal Module Reading Error |
237 |
Incorrect set of measured parameters |
238 |
Calibration Execution Error |
239 |
TRIG:SING interrupted |
240 |
Analyzer not ready |
241 |
AutoCal Module not ready |
251 |
Invalid trigger scope specifier |
252 |
Invalid trigger polarity specifier |
253 |
Invalid trigger position specifier |
256 |
File not found |