SCPI Command
MMEMory:LOAD:SNP[:DATA] <string>
Loads the touchstone file with the specified name to the measured S–parameters of the active channel. The touchstone file types 1, 2 port (file extensions S1P, S2P) are supported. On completion of the command, the channel goes to the hold state. |
---|
no query |
The active channel set by the DISP:WIND:ACT command.
<string> File name
Save/Recall > Load Data From Touchstone File > To S-parameters…
Equivalent COM Command
SCPI.MMEMory.LOAD.SNP.DATA
app.SCPI.MMEMory.LOAD.SNP.DATA = File
String (write only)
Back to MMEMory
Back to Command Finder