For remote access to the Analyzer, make the following settings in its program:
•Enable HiSLIP server and/or Socket server.
•Configure the TCP/IP port number (optional).
note |
Configuring the TCP/IP port number is necessary only where several analyzer programs are simultaneously executed on the same PC, and these programs require remote control. In other cases, leave the default TCP/IP port number: for the HiSLIP server — 4880, and for the Socket server — 5025. |
To enable remote control of the Analyzer using the HiSLIP protocol, press the following softkeys: System > Misc Setup > Network Setup > HiSLIP Server {ON/OFF}. To change the TCP/IP port number of the HiSLIP server, use the following softkeys: System > Misc Setup > Network Setup > HiSLIP Port. |
To enable remote control of the Analyzer using the Socket protocol, press the following softkeys: System > Misc Setup > Network Setup > Socket Server {ON/OFF}. To change the TCP/IP port number of the Socket server, use the following softkeys: System > Misc Setup > Network Setup > Socket Port. |