The calibration kit employed during a calibration should be selected according to the following procedure. If it is not specified in the list of the predefined calibration kits, it should be added. The procedure of adding and editing of the calibration kits is described in Calibration Kit Selection for Editing.
To achieve the specified measurement accuracy, use a calibration kit with known characteristics.
To select the calibration kit, use the following softkey Calibration in the left menu bar. The currently selected calibration kit is indicated on the softkey Calibration Kit. Click this softkey and select the required kit from the list. Complete the setting by clicking Ok.
|
Rev.: 24.1