SCPI Command
SYSTem:CORRection[:STATe] {OFF|ON|0|1}
SYSTem:CORRection[:STATe]?
Description
Turns the system correction ON/OFF. The system correction is the factory full one-port calibration performed at the port connectors. |
|---|
command/query |
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
System > Misc Setup > System Correction
Back to SYSTem
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3