SCPI Command
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0:REAL <numeric>
CALCulate<Ch>:FSIMulator:SENDed:ZCONversion:PORT<Pt>:Z0:REAL?
Description
Sets or reads out the real part of the impedance of the port impedance conversion function. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2}
Parameter
<numeric> the impedance value from 1e–6 to 1e10
Unit
Ω (Ohm)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
50 Ω
Equivalent Softkeys
Analysis > Fixture Simulator > Port Z Conversion > Port n Z0 Real
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3