SCPI Command
TRIGger[:SEQuence]:SCOPe <char>
TRIGger[:SEQuence]:SCOPe?
Description
Sets or reads out the trigger scope. The trigger scope determines the response on the trigger signal arrival: either starts a sweep of all waiting channels in turn or starts a sweep in the active channel only. |
|---|
command/query |
Parameter
<char> Choose from:
ALL |
All channels |
ACTive |
Active channel |
Query Response
{ALL|ACT}
Preset Value
ALL
Related Commands
Back to TRIGger
Back to Command Finder
Rev.: 26.00