SCPI Command
TRIGger:OUTPut:FUNCtion <char>
TRIGger:OUTPut:FUNCtion?
Description
Selects the trigger output function. The trigger output outputs various waveforms depending on the setting of the Output Trigger Function (see the Trigger Output Function). |
|---|
command/query |
Parameter
<char> Choose from:
BSET |
Before frequency setup pulse |
BSAM |
Before sampling pulse |
ASAM |
After sampling pulse |
RTRG |
Ready for trigger signal |
ESWP |
End of sweep pulse |
MEAS |
Measurement sweep signal |
PLIM |
Peak limit test pass/fail. TRIG OUT port 1 set to Peak Limits Pass, TRIG OUT port 2 will be set to Peak Limits Fail. |
Query Response
{BSET|BSAM|ASAM|RTGR|ESWP|MEAS|PLIM}
Preset Value
BSET
Related Commands
Back to TRIGger
Back to Command Finder
Rev.: 26.00