CMT VNA Programming Manual

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Command Reference > INITiate

INIT:CONT

Scroll Contact Us Home Prev Top Next More

SCPI Command

INITiate<Ch>:CONTinuous {OFF|ON|0|1}

INITiate<Ch>:CONTinuous?

Description

Turns the continuous trigger initiation mode ON/OFF. When the continuous initiation mode is turned ON: •If the Internal trigger source is selected by the command TRIG:SOUR INT, then the channel continuously sweeps; •If the trigger source selected is one other than the internal, then the channel goes to the trigger waiting state. Upon receipt of a trigger from the selected source, the sweep starts for the channels awaiting trigger. On completion of the sweep the channel goes to the trigger waiting state. When the continuous trigger initiation mode is turned OFF the channel is in the Hold state, to initiate a sweep use the INIT command.
command /query

Turns the continuous trigger initiation mode ON/OFF.

When the continuous initiation mode is turned ON:

•If the Internal trigger source is selected by the command TRIG:SOUR INT, then the channel continuously sweeps;

•If the trigger source selected is one other than the internal, then the channel goes to the trigger waiting state. Upon receipt of a trigger from the selected source, the sweep starts for the channels awaiting trigger. On completion of the sweep the channel goes to the trigger waiting state.

When the continuous trigger initiation mode is turned OFF the channel is in the Hold state, to initiate a sweep use the INIT command.

command /query