SCPI Command
CALCulate<Ch>:PARameter<Tr>:SPORt <port>
CALCulate<Ch>:PARameter<Tr>:SPORt?
Description
Sets or reads out the number of the stimulus port when performing absolute measurements or DC Voltage measurements. |
|---|
command/query |
Target
Trace <Tr> of channel <Ch>,
<Tr>={[1]|2|...16}
<Ch>={[1]|2|...16}
Parameter
<port> the number of the stimulus port
Out of Range
Error occurs. The command is ignored.
Query Response
<port>
Preset Value
1
Back to CALCulate
Back to Command Finder
Rev.: 26.00