One of four trigger sources can be selected. This setting works at the Analyzer level.
Trigger Source |
Function |
|---|---|
Internal [default] |
The Analyzer generates a trigger signal automatically when needed. |
External |
A trigger signal is a logic signal at the external trigger input (See External Trigger Settings). |
Bus |
The trigger signal is generated by a command from the program controlling the Analyzer via SCPI. |
Manual |
The trigger signal is generated by pressing the Trigger softkey in the Analyzer software. |
|
To set the trigger source, use the following softkeys: Trigger > Source Then select the required trigger source: •Internal •External •Manual •Bus |
Rev.: 25.00