ACM6000T Automatic Calibration Module

Copper Mountain Technologies is announcing an End-of-Sale (EOS) for the ACM6000T. This product is no longer available for purchase as of December 31, 2019. We will provide service and repair for this instrument for a minimum of 3 years from the EOS date and based on parts availability afterwards.


Minimizing the number of steps required by technicians reduces the risk of human error and expedites the calibration process. Automating the calibration routine also reduces wear and tear on the analyzer and RF cables. To perform full two-port calibration, each end of the ACM need only be connected to the analyzer once, as opposed to seven connections with a traditional calibration. The ACM also contains a factory characterized 20dB in-line attenuator which acts as a simulated device under test (DUT). The confidence check feature loads the factory stored DUT into memory so proper calibration can be verified.

  • ACM6000T Automatic Calibration Module
  • Frequency Range: 20 kHz 6 GHz
  • Impedance: 50 Ohm


If you want to consult with our engineers about your specific application, please Ask an Engineer.



ACM6000T Data Sheet

Last updated 10/22/19


ACM Operating Manual

No content
No content