CMT S2 and S4 VNA Instrument Driver Readme
To rate this instrument driver, go to the driver download page on the Instrument Driver Network.
1. Overview
Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: Copper Mountain Technologies
Supported Language(s): LabVIEW
Supported Model(s): Planar-304/1, Planar-804/1, Planar-814/1, S5048, S5065, S5085, S7530, S5180, C1209, C1220,
C2220, C2209, C1205, C1207, C1214, C4209, C4220, Planar-808/1, C1409, C1420, C4409, C4420
Model(s) Tested: Planar-304/1, S5048, C1209, Planar-808/1
Interface(s): Ethernet using HiSLIP or TCP/IP Socket network protocols.
Firmware Revision(s) Tested: 18.2.0
Certified: No
NI Supported: No
Source Code Available: Yes
Driver Revision: 1.1.0
Original Release Date: 08/2017
Current Revision Date: 03/16/2018
2. Required Software
Some software components need to be installed before using this
instrument driver. The minimum versions of these components are listed
below, and can be downloaded from the Download Site.
Visa 5.0 or later
LabVIEW 16 or later
Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.
3. Known Issues
To report issues or provide feedback about this instrument driver,
please send an email to instrument.drivers@ni.com.
If you have any questions, please contact for further help.
4. Revision History
The latest version of this and other LabVIEW and LabWindows/CVI
instrument drivers can be downloaded at the Instrument Driver Network.
REV 1.0, 08/22/2017, LV 2015
Created
REV 1.1, 02/13/2018, LV 2016
Modified by I. Ivaschenko
Fixed:
- Send Trigger.vi, wrong *TRG command in Case structure
- Read Calibration Data Array.vi - delay removed
- Read Data and Memory Array.vi - delay removed
- Read Stimulus Array.vi - delay removed
- Revision Query.vi - removed LabVIEW Run-Time Engine check